110V Mini Split Heat Pump in Minisplitwarehouse.com Discover the best heating and air conditioning products for your home. Get OLMO 9000 BTU 16.5 SEER 110V Mini Split Heat Pump Air Conditioner. Price: $729.99 ex. tax. Call us 877-770-3548 or visit our website.
This newest model OLMO ductless mini split is a high SEER air conditioner and heater. It keeps you cool in summer and warm in winter. You are protected by a 5 year compressor warranty, 2 year's on parts, abundant parts availability and smart, experienced technicians should you ever need assistance.
KEY FEATURES
Auto Clean with dry anti-mildew design keeps you air fresh and clean.
Comfortable Sleep Mode lets you to design a cycle following your sleep pattern to maximize comfort and reduce utility bills.
Intelligent Defrost reduces energy loss and defrost time by only defrosting when needed.
Intelligent Preheat monitors outflow temperature and delays fan to prevent cold air from blowing into the room.
Low Voltage Startup saves power and lengthens the life of your mini split.
High SEER Inverter reduces energy consumption by adjusting the compressor speed to the room's required load.
And more: whisper quiet - 24 hour timer - auto swing louver - automatic diagnostic programs - EZ installation.
Indoor unit with “Gold Fin” coating (click for more info)
115V Outdoor Unit in Minisplitwarehouse.com Choose from more than 200 products that suits your needs exactly! Shop OLMO 9,000 BTU Alpic ECO Series 16.5 SEER 115V Outdoor Unit. Price: $549.99 ex. tax. Call us 877-770-3548 or visit our website.
Mini Split Heat Pump AC by Mr Cool in Minisplitwarehouse.com Experts are here to help you purchase a Mini Split System at the best price. Get DIY 24000 Btu 20 SEER Mini Split Heat Pump AC by Mr Cool. Price: $2,239.99 ex. tax. Call us 877-770-3548 or visit our website.
*Factory Warranty: 5 years Parts, 7 Year Compressor
Take full control of your home comfort with the 3rd Generation MrCool DIYMiniSplit System. Homeowners can easily install this outdoor heat pump condenser and indoorair handlersince installation requires no special tools, equipment, or training. This full heating and cooling system can be installed in just a few hours.
The key to the 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System's easy installation capability is the pre-charged Quick Connect line set — MrCool's cutting-edge technology that makes setup safe, simple, and cost effective. The line set uses the environmentally friendly, and chlorine-freerefrigerantR-410A, which is an alternative to old refrigerant that won't damage the ozone layer.
But what if your new MrCool ductless mini split runs low on that sameR-410A refrigerant? Not to worry, since an alert will appear on your indoor unit. It lets you know so you can address issues before they cause costly damage. Should a power outage occur, the 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System will auto start once power returns, making your home comfortable as soon as possible.
That's not all. The MrCool indoor wall unit also displays alerts when the air handler filter needs cleaning or replacement. With this feature, you can trust the air you breathe is always fresh! The cleaning alert displays after 240 hours of operation and filter replacement is suggested after nearly 3,000 hours of run time.
The outdoor MrCool mini split condenser can be anchored to the ground or attached to a wall with a bracket.
The 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System can handle a wide range of outdoor temperatures, as low as 5°F and as high as 122°F. Plus, with the auto, sleep, and timer modes you can customize your system to run to your preferences and keep yourHVACrunning efficiently; saving money.
When the 3rd Generation MrCool DIY mini split is in COOL, DRY, or AUTO mode, an anti-mildew function activates and keeps a low fan running for about 10 minutes with lowairflowto dry up condensation that can cause mildew growth. The unit also runs quietly and smoothly so you can trust it will work without any noisy interruptions while it keeps your air clean and at just the right temperature.
Want exacting control? You can control the 3rd Generation MrCool DIY Ductless Heat Pump Mini Split System wirelessly with the included remote, Google Assistant, Amazon Alexa, or an app from your Apple or Android device. Get custom performance from your ductless MrCool mini split system with the FOLLOW ME feature, an option for your maximum comfort that will track the air temperature around you as long as you keep the remote nearby.
The only ductless air conditioning and heating unit that is easy to install for thousands less than a conventional HVAC system. Mr Cool DIY Ductless Mini Split heat pump even adjusts the temperature to the perfect degree wherever you are in your room.
A MRCOOL DIY Series heat pump is the only ductless mini split system on the market explicitly designed for amateur installation. You don't need special tools or training to install this high efficiency heat pump. The line set precharged with R410A refrigerant, the quick hook-up electrical connections, and the quality engineering mean just about anyone can install a MRCOOL DIY in their home with no problem at all in only a few short hours. If you want great air comfort without paying an arm and a leg for installation, you want an easy-to-use MRCOOL DIY Series ductless heat pump.
Unlike any other ductless heat pump on the market, the MRCOOL DIY series is specifically designed for easy installation. The MRCOOL DIY series comes with a precharged refrigerant line, alleviating one major obstacle to amateur installation in a single stroke.
MRCOOL ductless mini split air conditioners and heat pumps are the cutting edge of what modern, flexible fabrication can produce. These air conditioners rely on state-of-the-art manufacturing processes and advanced design to deliver high efficiency air comfort anywhere you need it.
EASY DIY INSTALLATIONThe included 25′ pre-charged R410 quick connectlinesetallows you to install this innovative ductless system without special tools, equipment, or training.
FOLLOW MEPersonalized Performance for wherever you are in the room. Keep the remote close by, and MRCOOL DIY will track the air temperature around you to ensure you receive maximum comfort.
LOW AMBIENT COOLINGCool all the way down to 5°F. Maintain cooling even when the outside temperature reaches 5 degrees. This feature makes the MRCOOL DIY the ideal system for server rooms, greenhouses, and any other application that requires cooling all year.
AUTO RESTARTNever lift a finger after a power outage. The MRCOOL DIY auto restart will have the unit running again in no time at all.
GOLD FIN CONDENSERLive on the coast? Don’t worry, our condenser is built to resist long term corrosion.
REMOTE APP WIFI CONTROLControl your DIY anywhere with your Apple or Android smart device and an internet connection.
TEMPERATURE COMPENSATIONOur temperature compensation technology help keeps you comfortable in any weather conditions
LEAKAGE DETECTIONWhen the MRCOOL DIY detects low coolant an alarm will sound to alert you to the problem. This will prevent damage to thecompressorwhile you maintain high air comfort.
SLEEP MODEWe made Sleep Mode easy to program to save money, and let you sleep a little easier.
LOUVERPOSITION MEMORYThe louver will automatically move to the same position as you set last time the unit was turned on.
Pros of Using DIY Units
Cons of Using DIY Units
NO HVAC Contractor Needed
Higher Cost Compared to Regular Units
Easy to Install, as long as you read & follow directions
Many problems, if you dont follow directions
Best for people with technical experience
NOT for people with no technical experience
Includes the components you need for a basic install
Doesnt include everything you need for a full install
DIY troubleshoot if something goes wrong, they dont just replace a unit if you have a problem.
Have to DIY replacement parts (IE:PCB, Motors, etc)
Limit on copper line length, have to use the kits provided
Limited on indoor sizes, and only wall mount indoor units
No way to know if there are leaks in the coils
If there is a leak, you have to hire a HVAC tech to re-fill
Most people do not have the all the tools needed
Building Departments will not issue permits for DIY
10 Master Cartons of Install Kits in Minisplitwarehouse.com No matter what your requirements are, our range of smart, reliable and energy efficient ducted air conditioners means we have the solution to suit any lifestyle. Get 10 Master Cartons of Install Kits for Ductless Systems Wholesale Lot. Price: $6,360.00 ex. tax. Call us 877-770-3548 or visit our website.
These Copper Line Sets are Made IN THE USA. Pre-Flared, Pre-Insulated and ready to use.
ATTN: Wholesale Lots over $4k Cannot be Processed on a Credit Card. Please Contact Our Sales Department or Choose Check/Wire at Checkout and receive an additional discount.
Air Conditioning and Refrigeration Tube
CLI provides a variety of solutions for Air Conditioning and Refrigeration needs. Line-sets are copper tubing lines used to connect split system air conditioners and heat pumps. The two copper lines (liquid line and suction line) in the set are refrigerant lines that connect the condensing unit (air conditioner-outside) to the evaporator coil (e-coil) in the furnace unit. The line-set tubes are Pre-Flared & Pre-Insulated using ACR Tube or a Level Wound Coil (LWC). All CLI Air Conditioning and Refrigeration Tubes are produced with lubricants tested for R410A compatibility and formicary corrosion tested.
Pre-Flared & Pre-Insulated Line-Set: Line-sets are provided with a pre-insulated suction line paired with a bare liquid line in a convenient package. Line-sets have come into wide use in most areas of the country because they offer a better way to field connect split system air conditioners and heat pumps. Major advantages include:
Installation is quick, efficient, and economical.
The continuous, factory-applied insulation has no seams which can open to allow moisture entry, bothersome dripping and decreased system efficiency.
Tubes can be supplied in custom lengths for each job, reducing waste.
Factory assembly assures quality and consistency.
CLI provides a variety of solutions for Air Conditioning and Refrigeration needs. Line-sets are copper tubing lines used to connect split system air conditioners and heat pumps. The two copper lines (liquid line and suction line) in the set are refrigerant lines that connect the condensing unit (air conditioner-outside) to the evaporator coil (e-coil) on the indoor unit. The line-set tubes are Pre-Flared & Pre-Insulated using ACR Tube or a Level Wound Coil (LWC). All CLI Air Conditioning and Refrigeration Tubes are produced with lubricants tested for R410A compatibility and formicary corrosion tested.
ACR Tube : Liquid line and suction line can be field constructed and insulated using our superior clean and plugged ACR tube. This is typically for applications where a rigid straight tube provides the best solution for installation, such as commercial refrigeration applications.
LWC : CLI seamless smooth wall level wound copper tube is produced from a cathode based cast & roll process. A Level Wound Coil (LWC) is a long length of tube that is uniformly and tightly spooled in layers parallel to the axis of the coil. LWCs that require annealing are produced in our ultra clean annealing furnace which yields superior ID cleanliness. LWCs are used for a wide variety of applications in many industries.
4.5'' Expandable Line Cover in Minisplitwarehouse.com Choose from more than 200 products that suits your needs exactly! Shop 4.5'' Expandable Line Cover Heavy Duty by CoverGuard. Price: $169.99 ex. tax. Call us 877-770-3548 or visit our website.
Listed below are standard features for Cover Guards unique line set cover system.Guards single size expands in depth to save you time and money. The multi zone mini split solution. Cover Guard is heavy duty, its the strongest line set cover on the market.
The Cover Guards 4-stage adjustability is perfect to accommodate multiple zone line sets and allow the duct to expand from 2 to 4 inches deep.
Stay-Clean peel-n-go film allows for a no-fuss clean-up following an install.
Free-sliding zip-tie clips are pre-installed, relocating quickly and easily to position the zip tie where its needed most.
Components are paintable (see instructions for painting directions).
Components are UV stabilized and tested to temperatures from -4 degrees F to 140 degrees F.
Cover Guard components do not release under pressure. In fact, the greater the pressure exerted against the inside walls, the tougher the structure becomes, because the pressure causes the pieces to lock more tightly.
Fittings can be opened and closed as needed, so the system can be adjusted as necessary at any time.
Cam screws are constructed of hardened gun stock plastic. They will never rust. Quarter turn of the screw locks it in place for quick installation.
Ordering with a system? Use the Following Coupon Code to get $19.99 OFF: CGKIT (Coupon Only Valid with Qualified Systems)
Midea Wholesale Lots in Minisplitwarehouse.com Our store offers a huge selection of Multi Zone Ductless Mini Splits online at wholesale prices. Get 10 Midea 36000 BTU 17.6 SEER Ceiling Cassette Hyper Heat Pump AC Lot. Price: $24,754.60 ex. tax. Call us 877-770-3548 or visit our website.
Wholesale Lot : 10x36000 BTU Midea Ceiling Cassette System/17.6 SEER
Included in Package: *(10) Indoor Ceiling Cassette'swith Remotes & Grills *(10) Hyper Heat Pump Outdoor Units (-22F/-13F) *Requires 2 Sets of wires, 1-(set) for Power Indoor to Outdoor & 1-(set 16AWG) For Signal
INDOOR KEY FEATURES
KEY FEATURES
Built-in Condensate Lift pump The cassette is supplied with a condensate lift pump that is capable of lifting the water 29.5 in. (750 mm.) above the top of the unit.
360° Air Flow Panel With the 360° air flow panel, air is distributed to every corner of the room.
FEATURES
Available in 208/230V
Up to 17.6 SEER and 10.6 HSPF when paired with DLCLR outdoor unit
Modes: Cool, Heat, Dry, Fan, Auto
Auto-restart function
Louver control (fixed or swing)
Three fan speeds
Outside air intake
Built-in condensate lift pump
Follow Me (senses temperature at handheld remote)
Heating Setback (46° F Heating Mode)
Quiet indoor operation, as low as 49 dB(A)
Aluminum Golden Hydrophilic pre-coated fins
Grille/ceiling panel 3 x 3 sizes 24 to 48 KSALG0201AAA
Compatible With:
DLCLR Outdoor Unit Single Zone
Color: White
OUTDOOR KEY FEATURES
Extra Low Temperature Heating For when its cold outside, the heat output for this system is up to 69% of rated capacity down to -22° F (-30° C), making this a primary heat source and eliminating the need for a backup heat source.
Stepless Frequency Adjustment Precise control of the system maintains stable and constant room temperature while reducing sound level and saving energy.
Alpic Series
