Thursday, February 28, 2013

Ramsond Mini Split - Types of Pollution in Home!!!


Ramsond Mini Split - Asbestos.



Asbestos is the name of a group of naturally-occurring minerals that separate into strong, very fine fibers. The fibers are heat-resistant and extremely durable, and, because of these qualities, asbestos became useful in construction and industry. In the home it may or may not pose a health hazard to the occupants, depending on its condition. When it can be crushed by hand pressure or the surface is not sealed, to prevent small pieces from escaping, the material is considered FRIABLE. In this condition fibers can be released and pose a health risk, such as lung cancer from inhaling the fibers. However, as long as the surface is stable, not damaged, and well-sealed against the release of its fibers and not damaged, the material is considered safe until damaged in some way.


Ramsond Mini Split Heat Pump - Combustion Appliances.



Combustion appliances are those which burn fuels for warmth, cooking, or decorative purposes. Typical fuels are gas, both natural and liquefied petroleum (LP); kerosene; oil; coal; and wood. Examples of combustion appliances include space heaters, ranges, furnaces, fireplaces, water heaters, and clothes dryers. These appliances are usually safe. However, under certain conditions, these appliances can produce, and release into the home, combustion pollutants that can damage health or even kill. In addition, unvented or improperly vented appliances can add large amounts of moisture to the air, potentially resulting in both biological growth, and damage to the house. Proper sizing, installation, inspection, and maintenance of combustion appliances are extremely important. Providing good ventilation can also reduce exposure to combustion pollutants. 


Ramsond Corporation. Air Ducts.



Ducts should be tightly sealed to reduce air leakage. This is achieved by carefully sealing all duct seams and joints. (Note that standard cloth duct tape is not a suitable duct sealant material.) This can save energy and prevent contaminants from entering ductwork and circulating through the home. Air-sealing of ductwork also helps to balance the pressure of airflow through the ducts, preventing unplanned negative or positive pressures in the house that can lead to other problems. For example, leaky return ducts can create negative pressures which may lead to radon problems or combustion equipment backdrafting (see information on radon and combustion safety). Remodeling may present an opportunity to seal ducts that would otherwise be difficult to access.


 


During the actual renovation work, air duct registers in the area being renovated should be sealed during activities that will generate a lot of dust or debris. This can be done by taping plastic over the registers. Before the project is started, you should decide on a ventilation strategy to remove pollutants from the work area and prevent them from moving to other areas of the home.


Ramsond Mini Split Reviews. Energy Efficiency Improvements.



Tight energy-efficient homes save energy and money. And with proper mechanical ventilation, they can have better indoor air quality than a leaky home. One reason is reduced condensation which could lead to mold growth. Another reason is control. In a leaky home, outdoor air enters the house — through cracks, unsealed joints, and penetrations, for example — intermittently, depending largely on the weather. Some times there will be too much leakage, resulting in a drafty house. Other times there won't be enough, resulting in a stuffy house. Mechanical ventilation in a well-insulated, well-sealed house, however, can exhaust pollutants and bring in outdoor air in a planned way. This makes a house both comfortable and energy efficient. 

No comments:

Post a Comment